Presenza QL032 Installation Manual And User'S Manual Download Page 11

 11 CONGLOMKB .COM
 

 

Please contact 1-877-333-0098 for further assistance .

Care and Cleaning

UTILITY SINK

 

 

Your sink is manufactured with the highest grade stainless steel and will provide you many years of enjoyment with the proper care . 

 

Do

Do not

 

- After use, always rinse your sink with tap 

water to dilute and remove deposits .

 

- Towel dry after use whenever possible 

to prevent water spots . Should water 
spots occur, clean with a mild solution of 
vinegar and water followed by a thorough 
rinse .

 

- Use liquid soap, a general household 

cleaner, or a weak solution of vinegar and 
water for regular cleaning .

 

- Only use plastic scouring pads 

recommended for use in stainless steel 
sinks, and only use them in the bowl of 
the sink . Scrub in the direction of the 
satin finish lines.

 

- Do not allow any food, detergent, soap or 

grease to dry or sit for extended periods 
of time on the surface of the sink .

 

- Never use abrasive cleaning products, as 

they will dull and scratch the finish.

 

- Do not use scouting pads on the deck, as 

they will dull the mirror finish.

 

- Never use steel wool pads, as they will 

leave iron particles on the sink, which will 
cause corrosion .

 

- Never leave steel or cast iron pans in your 

sink for extended periods of time, as this 
can cause corrosion .

 
 

CABINET 

 
To maintain the surface of your cabinet, follow these tips . 

 

Do

Do not

 

- Remove dust and dry dirt with a soft, 

damp cloth .

 

- Clean grease, oil, paint and ink stains with 

isopropyl (rubbing alcohol) . Immediately 
rinse with water after stain removal .

 

- Do not allow your cabinet surface to 

come into contact with products such as 
acetone (nail polish remover), nail polish, 
dry cleaning solution, lacquer thinners, 
gasoline, pine oil, etc .

 

- Use caution when using sharp 

instruments that may fall and scratch the 
surface .

Summary of Contents for QL032














Reviews: