Presenza QK023 Installation Manual Download Page 12

12

 

Care and Cleaning

 
Your sink is manufactured with the highest grade stainless steel and will provide you many years of enjoyment with the proper care .

Do

Do Not

 

- After use, always rinse your sink with tap water to 

dilute and remove deposits .

 

- Towel dry the sink after use whenever possible 

to prevent water spots . Should water spots occur, 
clean with a mild solution of vinegar and water 
followed by a thorough rinse .

 

- Use liquid soap, a general household cleaner, or   

a weak solution of vinegar and water for regular  

 cleaning .

 

- Only use plastic scouring pads recommended for  

use in stainless steel sinks, and only use them in  
the bowl of the sink . Scrub in the direction of the  
grain (original polish lines) .  

 

- Do not allow any food, detergent, soap or grease  

to dry or sit for extended periods of time on the  

 surface of the sink .

 

- Never use abrasive cleaning products, as they will 

dull and scratch the finish.

 

- Do not use scouring pads on the deck, as they will 

dull the mirror finish.

 

- Never use steel wool pads, as they will leave iron  

particles on the sink, which will cause corrosion .

 

- Never leave steel or cast iron pans in your  

sink for extended periods of time, as this can  
cause corrosion .

Summary of Contents for QK023















Reviews: