Page 11
PS190 Programmers Guide
Command Format
PS190 by Presentation Switchers
Firmware Revision 1.0
$ MUTE 0
MUTE 0
Set Resolution
This command sets the current master volume level of the PS190.
Command Format
RES #
Replace # with the resolution (0-7). End command with carriage
return.
Resolutions:
0. Passthru. Use EDID from display without any modification.
1. 1080p (1920 x 1080 @ 60Hz)
2. 720p (1280 x 720 @ 60Hz)
3. 1920 x 1200 @ 60Hz
4. 1600 x 1200 @ 60Hz
5. 1280 x 1024 @ 60Hz
6. 1280 x 768 @ 60Hz
7. 1024 x 768 @ 60Hz
Once command is accepted the system will force a hot plug detect
on all inputs. All sources should react by resending its video at the
defined resolution.
Examples in ASCII
Response
RES 1
RES 1
Examples in HEX
Response
52 45 53 20 31 0D
52 45 53 20 31 0D
Command Line Example
PS190 by Presentation Switchers
Firmware Revision 1.0
$ RES 1
RES 1
Get Current Resolution Setting
This command obtains the current resolution table value.
