Presence iPecs LIP-9008, Operation Manual, Page: 19 / 23

Operation Guide Add On Packet LIP-9008 and LIP-9008G
4. Press [Hold]
5. Press [Speaker] to exit programming.
To stop covering another station
To disable call coverage, delete the flexible button programmed with the call coverage feature.
1. Press [Transfer]
2. Press the flexible button programmed with the call coverage feature.
(a) A tone will sound and the programming of the selected button will be displayed on the screen.
(b) If the specific button is not known, browse the flexible buttons by continuing to press each
flexible button until the screen reads “Call for sta”
3. Press [Hold]
4. Press [Speaker] to exit programming.
Call coverage ring delay
1. Dial [Transfer] [142]
(a) The screen will show options for a delay ring cycle.
(b) The chosen number reflects the number of rings at the covered station before the covering station
begins ringing.
2. Dial your selection, [0] through [9].
3. Press [Hold] to save your selection.
Silent call coverage
A station may use call coverage without ringing the covering station.
The flexible button programmed with the call coverage feature code would flashes instead of
ringing. This button must be pressed to pickup the call, simply going off-hook or lifting the handset
would not answer the call.
Please contact support if this feature is required. It cannot be configured from the station.
Additional Features
Voice Mail
Please refer to the Voice Mail add on packet that should accompany this document.
Page 15