background image

CONTACT US FIRST

[email protected]

1-877-PREPAC1

1-877-773-7221

Mon - Fri 

7am - 4pm PST

 

 

10am - 7pm EST

For help with assembly

If you have received a damaged or defective 

part or are missing hardware. 

 

We will process replacement parts in 2 business 

days or less.Parts are shipped via UPS Ground or 

mail.

Before you call please:

1) 

Record the following information from the 

shipping label on the outside of the box.  

You will need it for warranty purposes:

 

Ship To Name 

 

Sales Order Number

2)  

Note the product model number.

3)  

Review the contents of your shipment to 

determine what you are missing.

Tall Shoe Cubbie

Model #  USR-0008-1

Online Option

Fill out the Replacement Parts Order form in the Product 

Support section of our website: www.prepacmfg.com

Assembly Instructions

Prepac Manufacturing Ltd.

6705 Dennett Place

Delta, BC V4G 1N4

LB-0715

2012-09-27

DA

TE ST

AMP

This product is shipped in 

1 carton

Required Tools

Optional Tools

Using a power screwdriver will 

speed up  assembly.

Caution

Do not over tighten any screw.

The last few turns of each screw 

should be done very slowly or by 

hand.

Summary of Contents for USR-0008-1













Reviews: