temperature measured at the time the unit is connected or power is restored.
The LED default setting for the set operating temperature is 50
o
F/10
o
C. After a
power failure has occurred, the previously set temperature is automatically erased
and will have to be reset.
The LED default setting for temperature selection (
o
F/
o
C) is
o
F (Fahrenheit Scale).
SETTING OPERATING TEMPERATURE:
To set/change the operating
temperature:
1. Press and release either of the +/- temperature keys.
The LED display will temporarily reveal the flashing set temperature for
approximately 5 seconds. If you fail to set/change the operating temperature
within this 5 second period, the LED will automatically revert back and display
the internal (cabinet) temperature.
2. Each time you press the +/- keys during flashing mode will change the
temperature incrementally by 1
o
(Temperature ranges between 43
o
F ~ 57
o
F /
6
o
C~14
o
C). The operating temperature will flash in the LED display for
approximately 5 seconds after the selection is made, then revert back to
display the internal cabinet temperature.
TEMPERATURE SELECTION (
o
F/
o
C):
This unit can display temperatures on the