1
4
Steps
Procedure
Removal Procedure
8
centrifugal blade
axial flow blade
motor
evaporator
3) Twist off the bolts used for fixing the
centrifugal blade with wrench, take out the
washer and then remove the centrifugal
blade.
4)
Twist off the bolts used for fixing the axial
flow blade with wrench, take out the
washer and then remove the axial flow
blade.
5) Twist off the 4 screws used for fixing the
motor and then remove the motor from the
motor support.
Remove evaporator sub-assy
1) Release all the refrigerant before
disassembling the evaporator sub-assy
slowly, use the soldering gun to break the
connection between suction pipe and
compressor, capillary and condenser;
2) Twist off the 2 screws used for fixing the
evaporator with screwdriver.
