
8. The following cases are not malfunction
9. Trouble Shooting
5.When condensation forms on the outside of the refrigerator:
Condensation may form on the outside when the humidity is high e.g. during a wet season.
This is the same as when ice water is poured into a glass. It does not, therefore, indicate
a failure. Wipe the surface dry with a dry cloth.
If any case of malfunction happens, please inspect and dispel it according to the methods
shown in the following table:
If the above methods does not solve the problem, please contact the service centre
for assistance without any delay.
Situation
Water leaks from
refrigerator
compartment
Noises
Compressor does
not stop working
automatically
Foods frozen in
the freezing
compartment
Not cooling
sufficiently
Not refrigerating
Inspection
Check if there is a power failure.
Check if the power cord is plugged into the power outlet.
Check that the fuse (or circuit-breaker)has not blown.
The food may be packed too tight together which block
the flow of cool air.
You may have put in something hot or a lot of foodstuffs
into the refrigerator.
The temperature control dial may not have been set properly.
The door may not have been closed properly.
The door gasket may be damaged.
The refrigerator may not be well ventilated.
There may be insufficient space between the refrigerator
and the surfaces immediate to the sides and top.
Have the freezer temperature controls of the compartment
set to "colder" position?
Is the normal surrounding temperature bellow 5
?
Have the foodstuff been put too crowdedly?
Is the drainage pipe blocked ?
Is there any leakage from some objects stored in it?
Is the refrigerator installed firmly?
Has the refrigerator been struck by some other objects?
Is the food stored too much at one time?
Are the doors opened too frequently or too long?
Are the temperature controls of freezer and refrigerator
compartments set to "colder"position?
9
Summary of Contents for PRN435MW
Page 11: ......