7
7. Installing and Removing the Accessories
7. Installing and Removing the Accessories
8. The following cases are not malfunction
8. The following cases are not malfunction
1. To dismantle the slide shelf,
pull it straight upward levellingly.
Installing it just in the opposite
way.
1.The sides of refrigerator heat up. while the condenser is working, but this will not
influence on storage performance.
2.It takes a span of time for the temperature of the freezer and refrigerator compartments
to become cold while the refrigerator is working: If the
temperature of the two compartments are higher while he refrigerator is working, it
takes a span of time for the temperature of the two compartments to decrease.
3.The surface of the compressor becomes hot: It is normal for the surface of the
compressor to get hot in good working cond ition. Don't touch it with your hands.
4.When you hear a sound like water flowing:
The sound like water flowing is actually the refrigerant (cooling gas) flowing.
It does not indicate a malfunction.
5.When condensation forms on the outside of the refrigerator:
Condensation may form on the outside when the humidity is high e.g.
during a wet season. This is the same as when ice water is poured into a glass. It does
not, therefore, indicate a failure. Wipe the surface dry with a dry cloth.
2.If you need to replace the lamp,
pls according to below instruction,
.Pull out the power plug first,
.Aim at the bolt ora. Screw the bolt
lax by tools.
.Hold the both side of lamp-chim-
ney, take out it follow the arrowhead
direction in the photo,
.Unscrew the old lamp; replace the
new lamp,
.Install the lamp-chimney again.
Note: the lamp power is 10W.
Summary of Contents for PRN1205MW
Page 10: ......
