6
Please do the same in reverse to insert the shelf at a different height.
In order to make the most of the volume of the fresh food storage
compartment and frozen-food storage compartment, the user can remove
one or more shelves, drawers, out of the appliance, according to your daily
use.
3.
PRODUCT OVERVIEW
Small door
Pan
drain
，
Steel w ire shelf
Leveler
leg
，
Thermostat
Wire steel bar
*All images in this instructions manual are for information only; please refer
to your individual unit for details.
4.
OPERATION
4.1 Adjusting the Temperature
◆
The temperature selector knob is located on the right hand side
wall of the refrigerator interior
Setting “Off”
：
Unit Off
Setting“Min”
：
Less Cool Temperature
Setting“Med”
：
Normal Operation (adequate for most situations)
Setting“Max”
：
Coolest Temperature
◆
For high environmental temperatures e.g. on hot summer days, it may be
necessary to set the thermostat to the Coolest setting (position “Max”). This
may cause the compressor to run continuously in order to maintain a low
temperature in the cabinet.
◆
The first time you install your refrigerator, set the thermostat knob at
“Med”. Give your refrigerator time to cool down completely before adding
food. It is the best to wait 24 hours before adding food. The thermostat knob
controls the temperature. When the thermostat control knob is set to OFF,
the refrigerator will not be running.
4.2 Noise Inside the Unit
You may notice that your unit makes some unusual noises. Most of these are
