3
unit from the outlet.
■
After unplugging the unit, wait at least 10 minutes before re-plugging it.
Failure to do so could cause damage to the compressor.
UNPLUG CORD
■
To minimize shock and fire hazards, please do not plug or unplug the cord
with wet hands.
■
During maintenance and cleaning, please unplug the unit.
PROPER GROUNDING REQUIRED
■
To minimize shock and fire hazards, make sure that the unit is properly
grounded.
TEMPERATURE CONTROL OPERATION
INSTRUCTIONS
－
Cooler model
Setting the set point (desired temperature value)
To display or set the set point, proceed as follow:
1) Press
SET
for 1s, the set value will start flashing after a few moments;
2) Increase or decrease the value using
UP
or
DOWN
;
3) Press the
SET
button again to confirm the new value.