4
■
All units should be plugged into a grounded and properly-sized
electrical outlet with appropriate overcurrent protection. Please refer
to the electrical requirement on the nameplate.
NEMA plugs
NEMA 5-15P NEMA 5-20P
If you do not have the right outlet have a certified electrician install the correct
power source.
■
Please make sure that your unit has its own dedicated outlet. Do not
use an extension cord.
After proper installation, please plug the cord and turn on the power switch.
■
Operation instruction of temperature controller
－
Cooler model
Setting the set point (desired temperature value)
To display or set the set point, proceed as follow:
1) press
SET
for 1s, the set value will start flashing after a few moments;
2) increase or decrease the value using
UP
or
DOWN
;
3) press the
SET
button again to confirm the new value.
－
Freezer model
Setting the set point (desired temperature value)
To display or set the set point, proceed as follow:
4) press the
SET
button for more than 1 second to display the set point;
5) increase or decrease the value of the set point, using the and
respectively,until reaching the desired value;
