OPERATION
• Place the assembled fan on a flat, level, firm and
dry surface.
• Plug the power cord into a polarized 120 volt AC
wall outlet.
• Turn the fan on and select the desired running
speed with the Speed Control Switch
conveniently and safely located at the front of the
fan below the Front Grill.
• To adjust the fan‘s height, loosen the Height
Adjustment Knob by unscrewing counter-
clockwise only a few turns. Pull upward on the
chrome portion of the Pole Assembly while
holding the lower portion firmly to raise the
height, or push down on the chrome portion to
lower. Retighten the Height Adjustment Knob,
being careful not to overtighten.
• The fan‘s direction can be adjusted relative to the
base by loosening the Thumb Screw at the bottom
of the Motor Assembly, and rotating the Fan Head.
• To set the fan into oscillation, depress the Oscillation
Knob on the top of the Motor Assembly. The Fan Head will pivot side-to-side and
up and down. For stationary operation, pull up on the Oscillation Knob.
Care, Cleaning & Storage
• The Fan Blade and Grill Set should be cleaned regularly for more efficient
operation. Unplug the fan, then reverse the assembly procedure to remove those
parts from the Motor Assembly before cleaning. Wipe with a damp cloth, then
towel dry.
• Never immerse any fan components in water. Wipe the fan only with a dry or
lightly moist cloth, then immediately towel dry.
• Always store the fan in a cool dry location
• Ensure that the fan is switched off from the supply mains before removing the
guard.
- 5 -
OSCILLATING
KNOB
PIANO
BUTTON
SWITCH
THUMB
SCREW
HEIGHT
ADJUSTMENT
KNOB
