4444
8. After brewing, the appliance will automatically switch to the warming mode, which will
continue to keep your coffee warm until you turn off the appliance. It is suggested that
warming time should be not more than 1 hour. For an optimum coffee taste, serve it just
after brewing.
9. Always turn the coffee maker off and unplug the appliance when not in use.
CLEANING AND MAINTENANCE
Caution: Be sure to unplug this appliance before cleaning. To protect against electrical
shock, do not immerse cord, plug or unit in water or liquid.
1) Clean all detachable parts after each use in hot sudsy water.
2) Wipe external surface of the unit with a soft, damp cloth to remove stains.
Note: Do not attempt to clean the inside of water tank, as this will leave a residue of lint
and may clog your coffee maker, simply rinse with cold water periodically.
3) Water droplets may build up in the area above the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean, dry cloth after
each use of the product.
4) Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you should clean the mineral
deposits left by the water according to the water quality in your area and the use frequency.
We recommend removing mineral residues as follows:
1. Fill the tank with water and lime scale buildup cleaner (descaler) to the max level as
indicated on water gauge (the scale of water and descaler is 4:1, for details, refer to the
descaler instructions). Please use “household descaler”, you may also use citric acid
instead of descaler (one hundred parts of water and three parts of citric acid).
2. Insert glass carafe onto the warming plate.
3. Make ensure filter (without coffee powder) and funnel are assembled in place.
3. Switch on the appliance and allow it to “brew” the descaling solution.
4. After “brewing” one-cup solution, switch off the appliance.
5. Leave the solution for 15 minutes and repeat step 3-5.
6. Switch on the appliance and run off the solution until the water tank is completely
empty.
7. Rinse by operating the appliance with just water at least 3 times.