Premio VCO-6100 Series, User Manual, Page: 3 / 144

VCO-6100 Series
3
3.7 Installing SODIMM………...........................…………...…….….……………………....... 80
3.8 Installing CPU………........................................................................................ 81
3.9 Installing Mini PCIe card / mSATA.….………………….……………………..…………..... 86
3.10 Installing M.2 2280 NVMe SSD …………..…………………………………………………... 87
3.11 Installing WiFi Module.…………...…….………………….……………………..…………...... 88
3.12 Installing Mini PCIe card / 4GLTE...….………………………………………..…………..... 91
3.13 Installing Antenna........................................…...…….…………………..….……….... 92
3.14 Installing graphic Card……………………..……….................................................. 94
Chapter 4 BIOS Setup …………………………………………..……………..……………. 103
4.1 BIOS Introduction …….……….……………………………………….…….…..….…………... 104
4.2 Main Setup ……..……….………………….…………………………..….….………………...... 105
4.3 Advanced Setup …………………………………………..…………………………………………. 106
4.3.1 CPU Configuration ..…………...………………………………………..………………. 107
4.3.2 PCH-FW Configuration ……..……………….………..………..……………..…....... 108
4.3.3 SATA and RST Configuration ………………..……………….………………..…..... 109
4.3.4 RST (UEFI RAID) Configuration ……………………………………….………......... 110
4.3.5 Trusted Computing ……………………………..……………….………………..…...... 112
4.3.6 ACPI Settings ……………………………………………………….……………….......... 113
4.3.7 Super IO Configuration……………………….………………..…………………....... 114
4.3.8 Hardware Monitor………………………………………......………………..…......... 121
4.3.9 Serial Port Console Redirection ……………..………….………….….………..... 123
4.3.10 Network Stack Configuration ……………..…………………………..………..... 124
4.3.11 CSM Configuration ……………………………..……………..……..………………… 125
4.3.12 USB Configuration …………………………..………………………….………..…….. 126
4.4 Chipset ………..………………….…..….…..…………………………………………………........ 127
4.4.1 System Agent (SA) Configuration ………….…………………..…………………. 127
4.4.2 PCH-IO Configuration ………….……………………….………………..……………. 131
4.5 Security …………...….………………….…..….………………………………………..………..... 136
4.6 Boot …………...……….….………………….…..………………………..…………..…………..... 139
4.7 Save & Exit …...……….….………………….…..….…..……………………………………….... 140
Appendix WDT & GPIO ………………………………………………………………………….. 141
WDT Sample Code …….……………………….……………….……………..….…….…….…………... 142
GPIO Sample Code ………………………………………………………..…………………………………. 143
Chapter 3 System Setup …………………………..…………………………….…………… 71
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing …………………………………………………………………………………………….. 72
3.2 Removing heat sink cover………………...………………………………………................ 72
3.3
Disconnecting expansion module from computing module........................ 74
3.4 Removing chassis bottom cover…….......………………………….….………………...... 75
3.5 Install HDD/SSD on the internal SATA bay……………..…….………………………..... 76
3.6 Installing HDD on removable SATA HDD bay……...………………………………....... 78