Page 1
2017-06-07 Rev. A
103-0023-000
Warning & Disclaimer
• Please read this document before shipping, moving, handling, installing or setting up the product. Please
follow the instructions in this document during installation process.
• Keep the product packed in the provided packaging during moving, shipping and transporting at all time to
prevent product damage.
• This product is designed to be installed on plywood, wood stud, unistrut, solid concrete or cinder block walls.
• Before installing please make sure the supporting surface will support the combined load of the equipment
and hardware.
Consult with engineers for the wall structure inspection.
• Product is designed for indoor use only. Do not install this product outdoor.
• Use an assistant or mechanical lifting equipment to safely lift and position equipment as needed.
• Always install this product by professional installers. The installation requires more than one installer for
safety purpose.
• Install the unit away from fire. Do not use the product near fire.
• Make sure to power off the product before installation or maintenance.
• Clean the product with neutral cleaner. Do not clean the product with corrosive, flammable or toxic liquids.
• Only authorized professional installer or maintenance team shall open the unit. Do not open the enclosure
without proper training. Do not touch any component inside the product at any circumstance. Do not
add, remove, change or modify any part, cable or component inside or outside the product without the
authorization from Premio engineering team.
• For product specification, please refer to the product datasheet.
• The accuracy or completeness of the information provided in this document is not warranted. P
remio has all
rights reserved. The information in this manual has been carefully examined and is believed to be reliable.
Premio shall not be liable for any direct, indirect, incidental, special, exemplary, or consequential damages of
any kind, however incurred, through the use of the equipment, tools, software or product mentioned in this
document. Premio assumes no responsibility or liability for any errors or inaccuracies that may appear in this
document.
• The contents in this document are subject to change without notice. Please verify with sales for latest revision
• For customer support please call 1-626-839-3100 or email [email protected]