P-4
1. When this player is connected to the outdoor aerial, make sure that the TV programme is available
from the signal tower.
2. The quality of video depends on the signal strength.
3. When this player is connect to the outdoor aerial, in avoid that the huge buildings or obstacle would
block the signal.
Note: In some areas the indoor aerial terminal may different, if the terminal is not fitted to your player, a
connector is available for you to connect between CATV and player. Please refer to the above
illustration.
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that have a 12V, negative ground electrical
system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use in 24V vehicles.
CAUTIONS:
!
Use the unit only with the recommended car power adaptor, use with other car power adaptor might
damage the unit.
!
The recommended car power adaptor is for use with this unit only. Do not use it with other equipment.
!
In the interests of road traffic safety, do not operate the unit or view video software while driving a
vehicle.
!
Make sure the unit is fastened securely to prevent from moving outside of the vehicle in an accident.
!
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may
become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.
!
After use, disconnect the car power adaptor from both the unit and cigarette lighter socket.
FUSE REPLACEMENT
FUSE
PO) CAP
NOTE: Don't throw out the po) cap when replace the fuse.
CHARGE THE BUILT-IN BATTERY
The player is with a rechargeable lithium battery. Before using the battery, please make sure it is
charged. If not, charge it first. Slide the power switch to OFF position and then connect one end of the
supplied adapter to the wall outlet and the other end to the unit for charging the built-in battery.
To the cigarette lighter socket
P-5
Note:
1. The battery only could be charged at powering off mode.
2. If the unit is not in use for a prolonged period of time, it is recommendable to charge the built-in
battery each three months.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player
GET STARTED
1. Slide the POWER ON/OFF switch to turn on the player.
2. Press disc cover OPEN key to open the disc cover, and then place the disc onto the disc tray.
3. Close the disc tray and the playback starts automatically.
4. When a menu screen appears on the TV, move the navigation buttons to select a preferred track
number, then press OK button to start playback.
ADJUST THE VOLUME
During disc playback, press VOL +/- button to increase or reduce the volume level.
SKIP AHEAD OR BACK
Press NEXT or PREVIOUS button once during play to skip a chapter (DVD) or a track (CD) ahead or
backwards.
RAPID ADVANCE/REVERSE
During playback, press and hold FAST FORWARD or FAST BACKWARD button on the unit or press
FAST FORWARD or FAST BACKWARD on the remote several times to scan the disc forward or
backward at X2, X4, X8, X16,X32 of normal speed.
Press PLAY/PAUSE button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the player activates its resume function when
STOP is pressed in STOP mode; press PLAY/PAUSE button again, playback resumes at the point it
stopped previously; open the disc tray or press the STOP button one more time to clear the resume
function.
SLOW-MOTION PLAY (DVD)
Press SLOW button on the remote control during playback, the Disc will be played at 1/2 of normal
speed at first, each time this button is pressed, the play speed becomes slower at 1/4,1/8 and 1/16
speed.
STEP PLAY
During playback, press STEP button to play one frame, each time the STEP button is pressed, the
player will play a corresponding frame; to resume normal play, press PLAY/PAUSE button.
MUTE PLAY
During playback, press MUTE button to shut the audio output off. To resume the normal play, press
MUTE button again.