Page 4
FUSE REPLACEMENT
FUSE
PO) CAP
NOTE: Don't throw out the po) cap when replace the fuse.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Press POWER switch to turn on the player.
2. Press DVD/TV button to switch to DVD mode.
3. Press CD cover Open to open the disc tray.
4. Place a disc onto the disc tray.
5. Close the disc tray and the playback starts automatically.
6. When a menu screen appears on the TV, move the navigation buttons or press the numeric
buttons to select a preferred track number, then press OK button to start playback.
ADJUST THE VOLUME
Press the button to increase or VOLUME- button to reduce the volume.
SKIP AHEAD OR BACK
Press NEXT SKIP or PREV SKIP button once during play to skip a chapter (DVD) or a track
(CD) ahead or backwards.
RAPID ADVANCE/REVERSE
During playback, press and hold F.FWD button or F.BWD button on the remote or press these
two button on the unit several times to scan the disc forward or backward at X2, X4, X8, X20
normal speed.
Press PLAY button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the player activates its resume function
when STOP is pressed in STOP mode; press PLAY button again, playback resumes at the
point it stopped previously; open the disc tray or press the STOP button one more time to clear
the resume function.
SLOW-MOTION PLAY (DVD)
Press ZOOM/SLOW button on the remote control during playback, the disc will be played at 1/ 2
normal speed at first, each time this button is pressed, the play speed becomes slower (down to
1/7 normal speed.)
Press PLAY button, normal play will resume.