Premier SX-1849DG, Instruction Manual

Page: 27 / 41

WWW.PREMIERMUNDO.COM
Page 3
PRECAUTIONS FOR DISCS
•
•
•
•
•
Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers
to come in contact with the shiny, unprinted side of the compact disc.
Do not attach adhesive tape, stickers, etc. to the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive
cleaners to clean the compact disc. If necessary, use a CD cleaning kit.
If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or
damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the
outer edge of the compact disc. Never wipe in circular motions.
CARING FOR COMPACT DISCS
BENZENE
CLEANER
•
•
•
•
This unit is designed to play only compact discs bearing the identification logo as
shown here. Other compact discs may not confirm to the CD standard and may not
play properly.
Compact discs should be stored in their cases after each use to avoid damage.
Do not expose compact discs to direct sunlight, high humidity, high temperature, or dust, etc.
Prolonged exposure or extreme temperatures can warp the compact disc.
Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink
may damage the surface.
COMPACT
DIGITAL AUDIO
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finishing on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton
swab moistened with head cleaning solution or ispropyl alcohol, then wipe dry with another swab.
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall
into the tape assembly.
CLEANING THE UNIT
Pinch Roller
R/P
Head Erase
Head
Capstan
Cotton Swab