Premier SCR-4640USP, Instruction Manual

Page: 17 / 25

P-4
2) Plug in SD/MMC card under USB mode, this unit will change to SD/MMC card mode;
3) Plug in USB under SD/MMC card mode, this unit will change to USB mode.
4) This unit will change to radio mode when USB/SD/MMC card is removed.
5) Press MOD button to change the mode when USB/SD/MMC card is plugged in. USB mode is
preseted when switching on the unit.
3. Time display and setting
1) Time will be displayed after slightly press the CLK button.
The LCD display will return back to its original display after 5 seconds.
2) Press and hold CLK button to set the time, time on the display will be blinking. Then slightly
rotate the rotary knob to set the hour. Press SEL to confirm the hour setting.
3) Then rotate the rotary knob to set the minute. To confirm the time setting, simply by pressing
SEL button.
4. Audio mode selector
1) Rotate audio mode selector to increase/decrease the volume level.
2) Press audio mode selector, “VOL, BAS, TRE, BAL, FAD, LOUD, EQ, DX, ST” on the display,
then rotate the audio mode selector to increase/decrease the volume, bass, treble, balance,
fader, loud on/off, EQ, DX/LOC, stereo/mono.
3) To activate the EQ function from the unit, rotate the volume knob selector until EQ is found on
the display; then rotate the volume knob to select your desired EQ mode: “POP-CLASS-
ROCK-EQ OFF”.
Note: If EQ is on, unit will not be able to control BASS & TREBLE function.
Radio Control
1. Band Control
1) Press BND button to select the band, repeatedly to cycle through 5 radio band:
FM1 – FM2 – FM3 – AM1 – AM2
2) Hold and press APS button, the radio will scan up all the strongest station and preset
automatically in 1-6 number keys.
In FM mode, 18 stations can be stored from FM1-FM3 mode;
In AM mode, 12 stations can be stored from AM1-AM2 mode.
Press any number button to enjoy the stored station.
2. Tunning Button
Press to auto tune the desire radio station, press and hold the button again, manual
tuning will be activated. It will resume to auto tuning automatically. To store the station, press and
hold any 1-6 number button.
MP3 Control
1. This unit can read the files which found in USB/SD/MMC card by plugging it into the slots.
2. When it is playing the tracks from USB, USB icon is found on the display.
3. When it is playing the tracks from SD/MMC card, SD icon is found on the display.
4. When the file type is MP3; then MP3 icon is found on the display.
5. When the file type is WMA; then WMA icon is found on the display.
6. Press fast forward to go to next track and press rewind backward to rewind to the previous track.
7. When MP3 is playing, press
button to pause it and to resume it by pressing again.