Premier SCR-4329DUSD, Instruction Manual

Page: 24 / 26

Press Power button (2) to turn on the unit.
When the unit is on,press Power button (2) to turn
off the unit.
Press Release button (16) to detach the removable
font panel.
Repeatedly press SEL button (3) toselect between
Volume(default),Bass,Treble,Balance and Fader
mode in followqing order:
Rotate VOL knob (3) to desired level of selected mode.
Rotate VOL knob (3) to desired sound level
Press SEL button (3) until “BAS” appears on display
Rotate VOL knob(3) to desired bass level
Press SEL button (3) until “TRE” appears on display.
Press VOL button (3) to desired treble level
Press SEL button (3) until “BAL” appears on display.
Rotate VOL knob(3) to desired balance level between
left and right speakers.
Press SEL button (3) until “FAD” appears on display.
Rotate VOL knob(3) to desired balance level between
front & rear speakers.
Press SEL button (3) until “LOUD” appears on display
Rotate VOL knob(3) to turn on or off the loudneess function.
Press SEL button (3)until “DSP” appears on display.
Rotate VOL knob (3)to desired audio mode. There are
5 kins of mode display in following:
Press SEL button (3)until “STERO” apperas on display.
Rotate VOL knob (3) to select ST or MONO function.
GENERAL OPERATIONS
ON/OFF
FRONT PANEL RELEASE
AUDIO Setting
VOLUME
BASS
TREBLE
BALANCE
FADER
LOUD
DSP
STEREO
06
UNIT INSTALLATION
23