USB Operation
Following the diagram below, connect
your USB device to the front panel USB
port (17). If it is properly connected,
the device will be mounted and start
playing automatically.
Changing From USB to DISC Playback
Modes
If you are in USB Playback mode and
wish to begin playback of a disc already
in the player, press the STOP button
once. Then press the GOTO button
and the player will switch to DVD/VCD/
CD/MP3 Playback mode.
Important Note:
TO PREVENT DAMAGE TO THE USB
DEVICE, DO NOT REMOVE OR
DISCONNECT IT DURING PLAYBACK.
It is also a good practice to remove
the USB drive during disc playback.
In USB Playback mode
REPEAT
REPEAT
Use the UP, DOWN, RIGHT or LEFT
buttons to navigate to and select files
to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files). To skip to the next or
last track, press the
or
buttons.
Press the
or
buttons for Fast
Forward or Fast Reverse playback.
play modes are also available
by repeatedly pushing
until
the desired mode is found.
WWW.PREMIERMUNDO.COM
WWW.PREMIERMUNDO.COM
Page 18
BASIC OPERATION
SD/MMC Card Reader Operation
Following the diagram below, connect
your SD card reader device to the front
panel USB port . If it is properly connec-
ted, the device will be mounted and start
playing automatically.
you can also select the desired item of
the SD card reader device
The buttons
on the remote control, have the same
functions as the buttons of this device .
.
1.
3.
4.
2.
5.
6.
Changing From DISC to USB Playback
Modes
If the disc present in the player is an
MP3 disc, press the STOP button once
and press the GOTO button to USB
playback.
If the disc present in the player is an
DVD or VCD or CD disc, press the
STOP button twice and press the
GOTO button to USB playback.
