background image

4

(3).

(3).

(3).

(3). Installation

Installation

Installation

Installation

3.1 The cooker hood should be placed at a distance
of 65-75cm (26-30inch) from the cooking surface for
the best effect. See Pic 1.
3.2 Install the hook on a suitable place once the
installation height is fixed, and keep it in line. The
fixed position of the inside chimney bracket is the
place of chimney.
3.3 Fix the extensible pipe according to the lead
direction and way, and then put the cooker hood on
the hook. See pic 3.
3.

4

Put the glass according to the lead direction and

way on the cooker hood, and then use the screws to fix the glass, also
lead the extensible pipe outside of the room, meanwhile adjust the height
of the inside chimney to the position of the inside chimney bracket and
fix on it by screw , here should be sure the inside chimney can be flexed
freely. See Pic 4.
3.5 Put the two chimneys together onto the cooker hood body, meanwhile
adjust the height of the inside chimney into the suitable height, and fix the
inside chimney to the inside chimney bracket by screw. Finally, fix the
body with safety screw. See Pic 5.
Note: The two safety vents are positioned on the back casing, with
diameter of 6mm.

Summary of Contents for PRA100











Reviews: