background image

The light colour of this product is outside the limits as defined in ErP Regulations and therefore only suitable 

for decorative purposes.

For replacement parts email: [email protected]

Complies with safety requirements of BS EN 60598

Manufactured & imported by:

Premier Decorations Ltd

UK: HA4 0EJ  

EU: Inniscarra D24 EO29



•     

 Make sure that the cable is completely unravelled and that there are no snags in the cable.

•     

 To operate, plug the transformer into mains supply, indoors.

TIMER:

•     

 Plug in to switch ON the lights and to activate the 10 hours ON, 14 Hours OFF timer. The button will

       light up green to indicate Timer is active.

      Press the button to switch OFF the lights and the Timer.

      Press button to switch the lights ON and to activate the Timer.

LEDs:

•     

 Non-replaceable Light Emitting Diodes (LEDs): Rating – 3V 0.018W  

TRANSFORMER:

•     

 This product is supplied with a DC 31V 12VA transformer and should only be used with this transformer.

FOR SAFETY’S SAKE:

•      It is very important that the product is NEVER DIRECTLY connected to the mains supply without using 

       the transformer.

•      Do not completely cover the LED with decorations and other flammable materials. Ensure adequate 

       airflow around each LED.

•      Do not damage the insulation of cable or LED holder.

•      Do not secure the wiring of the product with staples or nails.

•      Do not close doors or windows on the wiring as this may damage the wiring insulation.

•      Do not lay the cable under carpet or where it can be damaged.

•      Ensure that cables are fully unwound and sited where they will not become damaged or present a 

       tripping hazard.

•      Do not connect this product electrically to any other product.

•      Do not connect the product to the mains supply while it is in the packaging.

•      Do not allow any plastic part to come into contact with heat or flame.

•      Do not unscrew or twist the LED.

•      Do not submerge the product in water (e.g. puddles, guttering and ponds).

•      Transformers will become warm during use so should be positioned on flat, stable and heat resistant 

       surfaces. 

•      Unplug the product when leaving the house, when retiring for the night or if left unattended. 

•      Do not overload wall sockets. Use different sockets around the house to plug in multiple lights to 

       balance the load.

•      For decorative purposes only. Not suitable for use in play by children.

•      Please retain this information for future reference.   

Reviews: