password is
admin. Please note both username and password are case sensitive. On the landing
page, select
Access Point,
optionally change the password to enhance security, and press
‘Save
above settings and reboot’.
Your Wi-Fi Repeater WR06 will reboot, after which setup is
completed.
2.
WISP configuration
WISP is only used when there is an IP address problem, e.g. because too many devices are in
between the repeater and the real internet connection. With a normal modem in your home,
WISP is usually not necessary. The setup of WISP is as follows:
Plug the Wi-Fi Repeater WR06 into an empty power outlet, and wait for the Device status
indicator (4) to dim. Using your computer or smartphone, go to your Wi-Fi settings. Find and
connect to your repeater’s network SSID
WR06-XXXX(2.4G) or WR06-XXXX(5G). The default
password is
12345678. Then, scan the QR code, or enter http://premier.repeater in your browser
heading. A login screen will prompt. Here, the default username is
admin, and the default
password is
admin. Please note both username and password are case sensitive. On the landing
page, select
WISP.
In the next page, you set the ‘WAN Access type’ to
DHCP Client.
Optionally
change the password to enhance security.
Select
Scan Router
to search for local Wi-Fi network. Input your Wi-Fi router password. Press
‘Next’. Your Wi-Fi Repeater WR06 will reboot, after which setup is completed.
3.
Client / Router configuration
Plug the Wi-Fi Repeater WR06 into an empty power outlet, and wait for the Device status
indicator (4) to dim. Using your computer or smartphone, go to your Wi-Fi settings. Find and
connect to your repeater’s network SSID
WR06-XXXX(2.4G) or WR06-XXXX(5G). The default
password is
12345678. Then, scan the QR code, or enter http://premier.repeater in your browser
heading. A login screen will prompt. Here, the default username is
admin, and the default
password is
admin. Please note both username and password are case sensitive. On the landing
page, select
Client,
and then
Scan Router
to search for local Wi-Fi network. Input your Wi-Fi router
password. Press ‘Next’. A notice will appear. Press OK. Your Wi-Fi Repeater WR06 will reboot,
after which setup is completed.
VI. Troubleshooting
1. I may have set up the Wi-Fi Repeater wrongly, and want to change the settings.
Answer: Please reset your Wi-Fi Repeater. First, plug the repeater in a power outlet and wait until
the Device status indicator dims. Then, press the Reset button (2) for 5 seconds. The Wi-Fi
Repeater will then reset, and restart itself.
2. I have connected the Wi-Fi Repeater using WPS with the internet router, but cannot log in or
cannot detect the Premier Homeline WR06 network.
Summary of Contents for Home Line WR06
Page 1: ...WR06 USER S MANUAL GB NLn ...
