Premier EZ-RO 4, Installation, Operation And Maintenance Manual

Page: 9 / 26

Page 9
Green Tube Connection
Step 16 Locate the 1/4” green tubing in the box. Located on the back side of the RO system are
three 1/4” quick connect fittings. Connect one end of the green tube to the fitting behind the
Sediment Filter head (Red Label) by pushing firmly into the fitting. (See Picture Above)
Blue Tube Connections
Step 17
Locate the second 1/4” blue tube in the box. Connect this 1/4” blue tube to the 1/4” quick
connect elbow fitting located on the back side of the RO system directly behind the Pre-
Carbon filter head (Yellow Label) by pushing firmly into the fitting. Connect the 1/4” blue
tube from the RO Faucet to the 1/4” quick connect fitting located on the back side of the
RO system behind the Post-Carbon filter head (Blue Label) by pushing firmly into the fitting.
(See Picture Above)
Connect Green tube to the Adapt-a-Valve
Step 18
Insert the green tube attached to the RO system into the ¼” Quick Connect opening on the
adapt-a-valve until it stops. Approximately 3/4” of the tube should insert into the adapt-a-valve
fitting.
Connections on the back of the Reverse Osmosis System
1/4” Blue Tube Connection - to RO TANK
1/4” Blue Tube Connection -
to RO Faucet
1/4” Green Tube Connection -
to Adapt-a-Valve
* Remove Red protective plugs before tube installation!
NOTE
Reverse Osmosis Module Mounting
Step 19 Determine best location for the RO module to be mounted to allow
for future system maintenance. The parts bag has 2 self tapping
screws. Using an electric drill with a Phillips bit, screw them into
the cabinet wall 9.25” apart and 12” from the bottom of the cabinet.