P-4
Using your Food Processor
Note:
Thoroughly clean the parts that come into contact with food before you plug in and use the Food
Processor for the first time.
When you have attached the parts you need to the Processor Base, it is safe to plug in the power plug.
Controlling the processing speed is simple:
For continuous processing, or processing at desired speed:
turn the Control Dial clockwise to the
desired speed*. Turn back to ‘0’ position to stop the motor.
For short bursts:
Turn and hold the Control Dial anti-clockwise to ‘P’ position for a short burst of
processing. Release the Control Dial to stop; it will automatically go back to the ‘0’ position.
IMPORTANT
* To ensure longevity of the unit, do not let it run continuously for more
than 3 minutes. Let the motor cool down prior to using it again.
●
Using the st
ainless steel chopping blade
/ plastic mixing blade
Use the plastic mixing blade to mix flour/dough.
Use the stainless steel chopping blade for cake and pastry making, chopping raw and cooked meat,
vegetables, nuts, pate, dips, pureeing soups and to also make crumbs from biscuits and bread.
The length of the processing time with the stainless steel chopping blade will determine the texture
achieved. For coarser textures use the pulse control.
Note:
Do not use the chopping blade for mixing flour.
Preparing the processor for chopping / mixing:
1.
Insert the Drive Shaft into the Processor Base.
2. Secure the Processing Bowl onto the Processor Base by turning clockwise.
3. Put either the Chopping Blade or the Mixing Blade onto the Drive Shaft and press it to the end.
4. Place the lid on the Processing Bowl, then turn clockwise to lock onto the jug till you hear it click.
5. Feed the prepared food into the feed chute – if necessary, push the food in with the provided Pusher.
NOTE: Do not push food in with your fingers, utensils or anything other than the provided
pushers.
6. Select a speed or use the pulse control.
Summary of Contents for ED-5229
Page 8: ......
