P-4
To Assemble
1.
Before using the product for the first time, wash all the parts except the Motor Housing in warm,
soapy water and then rinse and dry thoroughly.
2.
Place the Motor Housing on a flat, stable surface, and then place the assembled Pitcher in the top
of the Motor Housing and turn counterclockwise until it is firmly in place.
3.
Place the Lid with Cap onto the Pitcher.
To Use
CAUTION:
Do not operate the product until it is properly assembled.
1.
Ensure the product is unplugged from the electrical outlet.
2.
Pour the product is unplugged from the electrical outlet.
3.
Wash all solid ingredients and cut them into pieces small enough to fit into the Cap.
CAUTION:
The Pitcher has a six cup (48 oz /1.5 liter) capacity. Do not over-fill it.
CAUTION:
Do not use the product for mashing or grinding heavy foods (e.g. , dough).
4.
After filling the Pitcher with ingredients, Place the Lid with Cap securely onto the Pitcher.
5.
Plug the product into a standard 220 volt AC electrical outlet.
6.
Turn the Dial to the desired speed (1-5) or hold the Dial in the “P” position for Pulse.
CAUTION:
Never operate the product empty.
CAUTION:
Never operate the product’s motor for more than three minutes at a time.
Allow the motor to cool for 60 seconds after three minutes of operation.
NOTE:
If the Blades are not operating smoothly, stop the product and add some liquid, or reduce the
contents in the pitcher.
7. Turn off the product by turning the Dial to the "0" position and then unplug the product from the
electrical outlet.
WARNING:
Always unplug the product when it is not in use or will be left unattended.
8.When the Blades have stopped, the Pitcher can be removed from the Motor Housing.
Care and Maintenance
WARNING:
Always ensure the product is unplugged from the electrical. Out before relocating,
assembling, disassembling, or cleaning it .
CAUTION
: Before disassembling the product for cleaning, ensure the Blades have completely stopped
and use caution when attaching or detaching them, as they are extremely sharp.
Always clean the product immediately after each use. Wash all parts except the Motor Housing in
warm. Soapy water and then rinse and dry thoroughly. Never immerse the Motor Housing in water
or other liquids or use abrasive cleaners. Do not place any parts into a dishwasher or extremely
hot water.
To disassemble the pitcher for cleaning, turn the Blade Base counterclockwise and remove it, the
Blades, and Gasket from the pitcher. Use a small brush (not included) to remove particles of food
lodged underneath the blades.
Store the product in a cool, dry place.
Summary of Contents for ED-5053GL
Page 6: ......
Page 12: ...P 5 CIRCUIT DIAGRAM Electrical Ratings AC220V 50Hz 500Watts ...
