P-4
9.
MIC VOL: This Knob to increase or decrease the volume of Micphone
10.
ECHO : This Knob to increase or decrease the volume of MIC ECHO
11.
MIC1/MIC2 : These two Sockets for the cable Micphone connection
BLUE-CONNECT INTRODUCTION
1. The Blue-connect
module
is built
in the PCB of the speaker system which could connect with other Blue-
connect device for audio
decoding. Operation steps:
I. Turn on the speaker, it automatically works in Blue-connect mode within several seconds.
II. When you see the LED display “BLUE” is flashing, it means the Blue-connect device of the speaker is waiting
for connection with other Bluetooth device.
III. Use your mobile phone/Notebook/Tablet PC/MID etc Bluetooth
device searching, you will find the speaker’s
Blue-connect device mode
”BB-5312 USBTB”
in your
Bluetooth device. Click connect after several seconds,
you will hear the sound “Beep” and the LED display “BLUE” is not flashing which means it connects successfully.
You can play music now.
IV. IV. If connection failed, please try to turn off the speaker system and restart the speaker meanwhile reset your
under matching Blue-connect device for repeating the operation of connection until it matches successfully.
V. Then you can choose the music playing from your Bluetooth device and operate it by remote control as well as
the buttons on the panel.
SPECIFICATION:
Outer put: 9.5W
Frequency: 100HZ---18KHZ
S/N:
≥
75db
Power supply: DC 9V-USB
Built-in Lion battery: 7.4V 2000MAH
Dimension: W220 x D168x H335mm
