Before using:
• Please charge the clipper for about 5 to 6 hours prior to initial use.
• Please charge the clipper for about 5 to 6 hours if the clipper is not used for over
6 months.
• When the adapter is connected with the clipper, the power indicator will light up.
To remove blade set
(see photo A)
1. Push in blade release to release the blade set.
2. Gently lift.
To reassemble blade set
(see photo B)
In reverse order with detach method.
1. Place the blade (align on the lever).
2. Push blade set down firmly and “snap” into place.
After using:
Be sure the clipper is OFF
1. Make sure to clean out the hair and lubricate the blade after using by using
the cleaning brush to clean the main body and blade set.
2. Use oil (2–3 drops) to lubricate the blade set.
3. Detach the blade and clean the remaining animal hair.
Charge both the spare
battery and the in-unit
battery at the same time.
3-½ hour recharge once
it is depleted.
Each lithium-ion battery
provides 3-½ hours of
run-time on a single
charge for day-long trim-
ming without recharging.
Battery and blade life
• Assembled with a high capacity Lithium-ion battery.
• If not using for a long period, keep batteries recharged.
• Use high-quality high carbon steel blades. Please clean and lubricate
periodically in order to ensure sharpness.
Battery Level Signal
Charging
Fully Charged
Error
Blue Light Blinking
Blue Light
Red Light Blinking
Basic Troubleshooting
Situation
Inspection Point
Method
Blade set doesn’t fit into the clipper
Lever of blade & moving blade does not fit well
Push the blade firmly in to place
Hair is lodged while cutting
Power electricity
Charge clipper, or change battery
Blade shakes while cutting
Blade Sharpness
Change blade set
Clipper will not charge
Adapter voltage
Change adapter
Plug
Make sure plug fits into clipper
Battery life
Change battery
A
blade
release
B
lever
The Premier 900cl Clipper is ready for a full day (up to 7 hours using included
batteries) of cord-free trimming and blocking. Each battery is rated for 3-½ hours of
runtime and will recharge to 100% within 3-½ hours. The charging station can charge
both the spare battery and the in-unit battery simultaneously.
Sharpening Blades, Combs & Cutters
• To reproduce the quality of the cutting edge on the clipper blades that came from the factory, a lapping
machine must be used. Most other methods are, in our experience, inferior to one degree or another. In
addition to producing a cutting edge that won’t last very long, some methods can permanently damage the
blades. The most common “culprit” is using the large high speed grinding wheels that are used to sharpen
cutters and combs.
• Who uses lapping machines and who does not? Obviously, Premier does and you can ship them to us. Other
firms also use systems/machines that work well.
Do’s and
Don’ts
for shipping blades to Premier (and others)
1. Do include payment (COD, credit card or check), name, return address, daytime phone number and specie of
animal for which the blades will be used. If paying by check, please include your social security number or
your order will be delayed.
2. Do keep clipping blade sets as pairs in the box.
3.
Don’t
allow the blades/combs/cutters to rattle around in the box.
4. Do wrap them in paper or wool felt to protect them.
5. Do clean in soapy water and cover them lightly with oil or WD40
™
before shipping. Premier adds a surcharge
for cleaning blades/combs/cutters that are too dirty.
6. Do ship dry blades. Blades must be thoroughly dry (no water) before shipping.
7.
Don’t
use so much grease or oil that it soaks up the box.
8. Send blades to: Premier 1 Supplies, 2031 300th St, Washington, IA 52353.
Preparing the animal for clipping
• Remove the dirt from the hair first.
If this is not done, expect accelerated blade wear and a reduction in
animals clipped between blade sharpenings in exact proportion to the amount of dirt present. The benefits of
dirt removal prior to clipping cannot be over-emphasized.
• Washing the animal with soap and water removes the most dirt.
If this is not practical, use a high
power vacuum or blower to remove as much dirt as possible from the hair or wool.
• Restrain the animal.
Few animals like the sound of a clipper or the feel of vibration on their skin. When they
react to either without warning, accidents can and will happen. Therefore, for the sake of you, your animal and
your clipper, restrain the animal properly prior to clipping.
Repairs
Send the clipper to a qualified technician. Premier is the ultimate repair shop for repairing all clippers/shears that
we sell. Call us for details at 800-282-6631.
Warranty
Defective parts and workmanship are repaired free of charge for up to 2 years on the clipper from the original
date of purchase. Does not apply to obvious abuse (e.g. damage from dropping, exposure to chemicals, immersion in
water), lack of maintenance and /or broken, dull or rusted blades.