5
3
PREMIERFAUCET.COM
Please contact 1-800-831-8383 for further assistance.
Pre-Installation
PPLLAAN
NN
NIIN
NGG IIN
NSSTTAALLLLAATTIIOON
N
Before beginning installation of this product, make sure all parts are present. Compare parts with the Hardware Included and Package
Contents lists. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service for
replacement parts.
Estimated Assembly Time: 60 minutes
TTOOOOLLSS RREEQQUUIIRREEDD
Putty knife
Carpenters
level
Toilet water
supply line
HHAARRDDW
WAARREE IIN
NCCLLUUDDEEDD
NOTE:
Hardware not shown to actual size.
PPaarrtt
DDeessccrriippttiioonn
QQuuaannttiittyy
AA
Floor bolt
2
BB
Floor bolt hex nut
2
CC
Wax ring
1
DD
Plastic disc
2
EE
Floor bolt wing nut
2
FF
Bolt cap
2
GG
Brass washer (Preassembled to Tank (A))
2
HH
Rubber washer (Preassembled to Tank (A))
4
II
Bolt (Preassembled to Tank (A))
2
JJ
Hex nut (Preassembled to Tank (A))
2
KK
Rubber sealing gasket
1
LL
Oval metal washer
2
MM
Wing nut
2
NN
Lock bolt
2
OO
Toilet seat washer
2
PP
Lock nut
2
5
PREMIERFAUCET.COM
Please contact 1-800-831-8383 for further assistance.
Installation
1
RReem
moovviinngg tthhee oolldd ttooiilleett
2
IInnssttaalllliinngg tthhee fflloooorr bboollttss
□
Turn off the water supply and flush the tank completely.
Towel or sponge remaining water from the tank and bowl.
□
Disconnect and remove the old water supply line.
□
Remove the bowl from the floor by removing the bolt caps
and the floor bolt nuts.
□
Remove the floor bolts from the toilet flange and clean old
wax, putty, and sealant from the base area.
□
Temporarily plug the floor flange with a towel or cover to
block sewer gases from escaping.
NOTE:
The mounting surface must be clean and level
before the new toilet is installed.
□
Insert the floor bolts (AA) into the slots on the toilet flange
(1) with the bolt heads down and threaded ends facing up.
The heads of the floor bolts (AA) should be perpendicular to
the slot opening in the toilet flange.
□
Ensure the floor bolts (AA) are parallel to the wall. When
set, hand-tighten the hex nuts (BB) onto the floor bolts (AA)
to secure.
