1. Mount the Hybrid 7600 to phone system wall or server rack (optional).
2. Connect the unit to an available Ethernet connection on the local area network.
3. Plug in the AC power adapter to power up the unit.
4. If the network operates a DHCP service, the unit will automatically receive a device IP address. The device IP address will display on the LCD
screen.
NOTE:
If a DHCP service is not available, please reference the complete installation guide for instructions on how to configure the unit.
5. Hit the “Info” button once to display service IP address. Write this address down and go to a computer on the local area network. Type the device
IP address into a web browser to access the configuration web pages built into the unit. These web pages allow the user to enter permanent data
as required.
6. Connect one of the included audio cables from the device RCA connector to the Music On Hold port of the phone system. Try the 600 ohm
output on the unit first. if volume is too low, use the 8 ohm output and adjust volume accordingly.
Installation for Ethernet Connection:
Technical Specifications
Ethernet
USB
LAN/WAN
USB Flash Drive
MP3
MP3
Built in GUI
none
25 min. @ 128 kbps
Depending on USB drive size
DHCP/Port 80
1.75” x 7.375’ x 4/25’ Rack mount = 1.75’ x 19’ x 4.25’
3lbs (boxed)
Amplified 8 ohm & 600 ohm
12 V DC @ 800 mA
Delivery Method:
Audio Type:
Download Software:
Flash Memory:
Install:
Dimensions:
Weight:
Audio Output:
Power Source:
Connection
Authorized Dealer
Warranty
Upon receipt, the manufacturer will repair or replace, at
its option, for a period of three years from the date of
purchase, any system that proves defective in materials
or workmanship. The manufacturer is not liable for
indirect, incidental, or consequential damages in
connection with the use of this product. This limited
warranty does not include labor for installation or removal
of the unit.
1.800.466.8642 - www.premtech.com - One Premier Drive Long Lake, MN 55356
