RACK MOUNT
Installation:
1.) Mount the Hybrid 7100 to phone system wall or server rack (optional).
2.) Connect the unit to an available Ethernet connection on the local area network.
3.) Plug in the AC power adapter to power up the unit.
4.) If the network operates a DHCP service, the unit will automatically receive a device IP address. The device IP address will
display on the LCD screen. NOTE: If a DHCP service is not available, please reference the complete installation guide for
instructions on how to configure the unit.
5.) Hit the “Info” button once to display device IP address. Write the address down and go to a computer on the local network.
Type the device IP address into a web browser to access the configuration web pages built into the unit. These web pages allow
the installer to enter permanent data as required.
6.) Connect one of the included audio cables from the device RCA connector to the Music On Hold port of the phone system.
Try the 600 ohm output on the unit first. If volume is too low, use the 8 ohm output and adjust volume accordingly.
Technical Specifications
Delivery Method:
LAN/WAN
Audio Type:
MP3
Download Software:
Built in GUI
Flash Memory:
25 min @ 128 kbps
Install:
DHCP/ Port 80
Dimensions:
1.75” x 7.375” x 4.25” Rack Mount = 1.75” x 19” x 4.25”
Weight:
3 lbs (boxed)
Audio Output:
Amplified 8 ohm & 600 ohm
Power Source:
12 V DC @ 800 mA
