Premier Tech Aqua Rewatec NEO Flachtank 800L, Technical Documentation Manual

Page: 19 / 20

Premier Tech Aqua • Rewatec
®
19/20 NEO Flat tank 800L
DORW5008- 16.02.2015
5.2 DN 300 Professional Tank Dome
- Height-adjustable, can be shortened by sawing. Tip: In order to use the volume in an optimal
way, the Professional Shaft Extension should not extend more than 50 mm into the container.
- Can be expanded using DN 300 underground sewer pipes.
- Car driveable.
- Delivered with its own technical documentation.
5.3 Use of the DN 50 lamella seal (included with rainwater systems)
A: Bore marking for the DN 50 lamella seal (Ø 58).
B: DN 50 lamella seal installed with the large seal on the
outside.
C: DN 50 “supply tube” as sheathing for the cables.
Installation:
Turn the shaft so that one of the two bore markings is aligned with the planned direction of the
tube. Bore a Ø 58 hole (using a hole saw, a jigsaw, etc.).
Deburr the ends of the tube on the inside and outside. Pull the cable through the hole and the
tube. Insert the tube into the seal until it is approx. 40 mm into the shaft.
www.rewatec.de
Technical changes and rights reserved. No liability for misprints
The contents of the technical documentation are a component of the guarantee terms
Planning and installation regulations are to be followed, as well as the accident prevention regulations.