PREMIER POLYSTEEL Champion 922-101 Manual Download Page 6

926-108  Single Pedestal Direct Bury Square Ta-

ble 

955-108 Single Pedestal Direct Bury Round Table

1  Bore a 12-14” diameter hole 36” into the ground.   
2  Place 4-6” of pea rock in hole. 
3  Place center pedestal post into the hole. 
4  Drill out all holes with a 7/16” drill bit.  Use a 1/2” drill bit for seat arm end plate holes 

and center pedestal post holes at their union. 

5  Bolt the support arms on to the center pedestal post using 1/2”x9” stainless steel hex 

bolts. 

6  Bolt seat supports on to the seat arms using 3/8”x2-1/2” stainless steel hex bolts. 
7  Bolt table top support on to the center pedestal post using 3/8”x2-1/2” stainless steel hex 

bolts. 

8  Bolt the table top on to the table top support using 3/8”x1-1/2” stainless steel hex bolts. 
9  Bolt the seats on to the seat supports using 3/8”x1-1/2” stainless steel hex bolts. 
10  Level table and adjust to desired height.  Recommended height is 20” from the ground to 

the top of the seats.  

11  Fill hole with concrete no higher than ground level. 

Periodic check of bolt tightness recommended. 

In Accordance to California law: WARNING This product contains a chemical known to the State of California to 

cause cancer and birth defects or other reproductive harm.

Reviews: