RTM-S
Installation Instructions
Page 11
Display Orientation
The RTM-S will allow the user to adjust the display a full 360°.
WARNING
:
BEFORE ROTATING THE RTM-S, MAKE SURE THAT THE M6 KNURL
KNOB IS SECURELY FASTENED TO THE RTM-S. ALSO, PLEASE MAKE
SURE YOU ALLOW ENOUGH CABLE AND WIRE CLEARANCE FOR FULL
ROTATION.
1. To adjust the RTM-S, rotate the
display either clockwise or
counter-clockwise.
2. Tighten the two
Phillips head locking
screws (see Step 5,
Page 10).
Tilt Positioning
The RTM-S has the ability to tilt
35° up.
Rotate the crank handle to tilt the
RTM-S:
Down - Clockwise
Up - Counter-Clockwise
The RTM-S has the ability to tilt 10°
down.
1. Once the position has been locked down, use an Allen wrench to take off the crank handle.
2. Once the crank handle has been removed, re-attach the crank handle, facing the opposite direction. This
is the storage position for the handle.
M6 Knurl Knob
Crank Handle Storage Position
