Installation
Instructions
Page
9
RTM-S
Step 6.
Lower the universal bracket bar and display into the cradle (as shown
to the left).
The circular portion of the universal bracket bar must rest inside
the nylon sleeve. If seated improperly, the operation of the RTM-S
will be hindered and the nylon sleeve will become damaged.
Nylon
Sleeve
Step 7.
Insert an M6 knurl knob into the knurl knob mounting point and
tighten.
Step 8.
OPTIONAL - Insert a M6 x 12mm security screw and M6 lock washer
into the mounting point and tighten using the M5 Allen wrench
(supplied).
Knurl Knob Mounting Points (a knurl knob may be placed in either mounting
hole).
M6 x 12mm Security Head and M6 Lock Washer Mounting Points (a security
screw may be placed in either mounting hole).
Step 9.
OPTIONAL - Tighten the two (2) Phillips head screws (located on the
side of the mounting block) to prevent the mount from rotating.
