- 6 -
Step 1
CAUTION
:
The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product.
Invert the plasma display and set it on a flat and soft material such as (blankets, foam, cloth etc.) to prevent any damage to the plasma display. See fig 1.
WARNING
:
Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could
result in serious personal injury and possible damage to the plasma display.
Step 2
Locate the mounting points found on the back of the plasma display, align the mounting holes from the mounting bracket to the holes on the plasma display. Arrow
found on the mount must always be pointing to the top of the plasma display before securing it to the plasma display. Loosely install the six (6) M8 x 20 Phillip
screws to the plasma then secure the screws with a Phillips screwdriver
CAUTION
:
Do not over tighten the M8 x 20 Phillips screws.
See fig 2.
WARNING
: Do not use a drill gun to secure the screws to the plasma display. A Phillips head screwdriver is preferred.
Soft and flat surface
blankets, foam, cloth
etc.
Inverted plasma
display
Top of the plasma
display
Bottom of the
plasma display
Inverted plasma
display
Tilt back
plate
Mounting hardware
(6) M8 x 20 Phillip
screws
Installing the mounting bracket
