Page 6
Installation Instructions
PRF-100
Step 1. Re-attach the M6 x 75mm Phillips head
locking screws to the cover plate.
If the flat-panel is not long
enough to cover the length of the
M6 x 75mm screws, replace them with
two (2) M6 x 12mm combo head
screws.
M4 x 10mm combo
head screw
Cover Plate
Securing Screw
Mounting Point
Flat-panel
Slotted Opening
DO NOT OVERTIGHTEN THE
MOUNTING SCREWS
Cover Plate Installation
Flat-panel Installation
Solid S
urfac
e
Cind
er B
lock
Step 1. Lower the flat-panel onto the wall plate so
that the mounting tab is inserted into the
mounting slot.
Mounting
Slot
Mounting
Tab
Do not release the display until you are
sure the flat-panel is resting securely on
the wall plate.
Step 2. Secure the two plates by inserting and
tightening the two head locking screws
located at the bottom of the cover plate.
Use a Phillips head screwdriver to
tighten these screws.
Head Locking
Screws
Solid S
urfac
e
Cind
er B
lock
Screwdriver
The cover plate mounting slot must
be facing up.
Step 2. Secure the cover plate to the flat-panel
using four (4) M4 x 10mm combo head
screws.
The slotted opening of the cover plate must
be facing up and the flat surface touching
the flat-panel surface.
If the threading on the flat-panel is too
deep, use four (4) M4 x 12mm combo
head screws instead.