www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100 | Europe +44 (0) 24 7664 4105
Installation Guide
LMVP
Page 14
Servicing
1. Push evenly in the front of the LMVP to release the
single latch spring lock (Figure 1).
2. Slowly pull the front of the LMVP to extend the scissor
arms (Figure 2).
3. Loosen the locking safety screws on both mounting
brackets.
4.
Tilt up the bottom of the flat-panel, then set their
kickstands against the bottom tubing of the mount
(Figures 2 & 3).
5. Perform any neccessary repairs. Close the latch
after servicing.
Figure 3
Figure 1
Figure 2
Single Latch Spring Lock
23
