Premier Mounts PMC-MM-500 Installation Manual Download Page 3

Warranty

: http://www.mounts.com/warranty

Garantie, Garantía, Garanzia, Garantie, Waarborg

www.mounts.com  |  North America  800.368.9700  | Interna1-714-632-7100 |  Europe  +44 (0) 24 7664 4105

9531-060-021-00

6

5

4

3

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PMC-MM-500

4mm

4mm

4mm

4x

4x

13mm

3

4

5

6

Repeat the same procedure with the upper rear panel to the 
leg assembly with the four each “button head” Allen screws 
supplied.
Now secure firmly the four lower pan “button head” screws 
to the leg assembly and tighten firmly. Repeat the same pro-
cess with the front and rear upper cover panels but “don’t” 
over-tighten these.

The rear oval panel cover can be installed before or after 
final assembly  of the cart with the four each M6 button head 
Allen head screws supplied.

Loosely install the front upper cover  to the front of the cart 
with the four M6 x 1.0 x 10mm”button head” Allen screws 
supplied. 

Install the front “logo” plate to the lower panel cover with the 
four each 10/32 x 1/2” “kep” nuts and flat washers supplied.

Summary of Contents for PMC-MM-500










Reviews: