Installation Guide
PFC-OMND
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
1
2
Page 6
Center Mark
46”
46”
55”
55”
For mounting the template
temporary in place.
USE THE TEMPLATE FOR PRE-INSTALLATION
REMOVE THE HANDLES
Finned Anchor
Concrete only
Position the template to the desired location.
Mark the mounting points based of the flat-panel
display sizes, either 46” or 55”
Drill into 4 marked mounting points using specific
size bit depending on the application.
Wood Application:
Use 1/4” drill bit
Concrete Application:
Make a pilot hole with 1/8”
or 7/32” drill bit.
Finish with 3/8” drill bit.
Use Drill Bit by
application
Snap-on
Cap
5/16” x 3” Hex Lag
Screw with 5/16”
Washer
See OMN (Semi-outdoor installation guide) for further details.
1
2
