Installation Guide
PDS-URPM
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
1)
Identify the projector’s approximate front-to-back center of gravity. Place your
hands on each side of the projector and gently lift it an inch from the surface
on which it is resting. Carefully adjust your grip on the projector until it seems
balanced from front-to-back. Mentally note the apparent center of gravity.
2)
Identify the projector’s approximate side-to-side center of gravity. Place your
hands on the front and back of the projector and gently lift it an inch from the
surface on which it is resting. Carefully adjust your grip on the projector until it
seems balanced from side-to-side. Mentally note the apparent center of gravity.
Side-to-Side
Center of Gravity
Front-to-Back
Center of Gravity
Do not over tighten the mounting screws.
6
7
8
Insert one (1) Barrel Cap into the end of each leveling barrel
Tighten the mounting screws which secure the mounting legs to the projector.
Page 4