![background image](http://html.mh-extra.com/html/premier-mounts/pcm-ms2/pcm-ms2_installation-instructions-manual_1596372012.webp)
PCM-MS2
Installation Manual
Page 14
Marking the Bottom Plate Mounting Points
Step 1.
Place the upper portion of the bottom wall plate to the reference line and mark the four (4) lag bolt mounting points through
the wall plate slots on the wall.
Step 2.
Level the wall plate with the reference arrow pointing up to the ceiling.
Step 3.
Pilot holes are recommended, size will depend on the commercially available hardware that will be used.