www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
8
(6) M6 x 12 mm
Screws
(2) 1/4" Washer
(2) Nylon Spacer
Secure the projector to the base box using six (6) M6 x 12 mm screws , two (2) nylon spacers, and two (2) 1/4" washers.
Make final adjustment
roll, yaw, pitch then tighten screws.
Page 5
Raise the projector to the base box and hook it onto the base box. Make
sure the projector is hooked onto both sides.
(1) Base Box
6
7
Pipe ( Not Supplied)
Lock Nut
M6 x 8 mm Set Screw
Pipe Ceiling Installation
1) Install the base box to the pipe. Make sure the Lock Nut is on the pipe
before installing the base box.
2) Secure the base box to the pipe by installing the M6 x 8 mm Set
Screw using the M3 Allen Key
Installation Guide
PBM-UNI
