background image

www.mounts.com  |  North America  800.368.9700  | Interna1-714-632-7100

Figure 6

. Low Profile Installation

2

1

Tension Knurl 

 

Insert universal bracket 

to the tri -lock, then 
rotate the projector 180

°

 

The alignment slot 

must be in direct 

alignment with the 

safety knob to lock 

the mounting 

bracket to the upper 

assembly.

To secure the 

mount, replace the 

red safety knurl 

knob with one (1) 

M6 x 25 security 

screw (supplied).

Projector  

Tri -Lock Opening  

Universal Mount  

Alignment Slot  

Securing the Projector to the Upper Assembly

Step 1.  Make sure the three-knurl knobs are loosened to fully expose to the "tri-lock" mounting plate in the base of the upper assembly.

Step 2.  Carefully lift the projector and insert the mounting bracket mating special tri-lock cutout into the mating portion of the upper assembly. 

Step.3   Once inserted, rotate the projector and mounting bracket 180º and secure the rear safety knob first to prevent further rotation of the bracket                

             in the upper assembly

Step 4. Tighten the remaining two tension knurl knobs until the mount becomes rigid. The safety knob should line up with the alignment slot on            

             the mounting bracket

Follow the numbering sequence prior to securing the projector to the upper assembly.

Suivez la séquence de numérotation avant de le fixer le projecteur à l'assemblage supérieur 

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PBC-UM SERIES

Summary of Contents for PBC- UMW















Reviews: