SCREWS
TENSION
SCREWS
SAFETY
(OPTIONAL)
1-1/2 (NTP) PIPE
TOP PLATE
JAM NUT
M6 X 12 (MM)
SCREW
M6 x 12 (MM)
M6 x 12 (MM)
STEP 3
NOTE: STANDARD DIAGRAM SHOWN BELOW.
Raise the projector with the mounting bracket attached. Fully insert the arrow
design opening from the mounting bracket to the receiving tabs found on the
bottom plate of the Gyrolock®. Once the bracket is inserted, rotate the
projector 180° and align the front arrow shaped slot from the mounting
bracket to the safety screw. The safety screw must go past the arrow shaped
slot below to prevent further rotation. Finger tighten the rest of the tension
screws to stabilize the mounting bracket.
See (Fig 3,4)
Fig 3
Fig 4
•
Roll & pitch grater than + or - 20° from center
•
Quick positive release with positive security lock
•
360° yaw
•
Cables can be routed inside the adjustable column or 1.5" piping
ADJUSTMENTS
(Optional) 1.5 PIPE
