NOVA-EXT
Installation Manual
Page - 5 -
Attaching the Mount
Unpack the NOVA-EXT Mount
and familiarize yourself with the components. Before proceeding, the SpiroLock™ must be separated
(please refer to Disconnecting the SpiroLock™ Assembly, page 11). Please take time before you install the NOVA-EXT to determine
the location of where the NOVA-EXT will be mounted.
1. Locate the mounting points on the bottom of the projector (see arrows above for sample mounting points).
2.
Attach the appropriate number of mounting legs to the projector using the corresponding mounting hardware (see Page 3, Selecting the Proper
Mounting
Hardware).
3.
If the mounting legs need to be leveled, rotate the leveling barrels by hand to level the mounting bracket.
4.
To raise the mounting legs, rotate the leveling barrel clockwise. To lower the mounting leg, rotate the leveling barrel counterclockwise.
5.
When the desired position is achieved, tighten the mounting screws to the projector.
