North America
800.368.9700
| International
+1-714-632-7100
| www.mounts.com
3
1/2”-13 Bolt
1/2”-13 Washer
1/2”-13 Nut
Step 2
Step 3
Warning
Secure the head using the 1/2-13” bolts, washer and
nuts.
Note: Use only the grade eight hardware supplied to
mate the header assembly to the top of the wall
frame! Using lower grade hardware could compromise
the integrity and safety of the installation.
With the displays installed and aligned per the first
section of this manual, the video wall is ready to
be suspended using the customer supplied
suitable rigging hardware and qualified personal
to fly the completed video wall system.
If you are not using the base assembly shown
above during the assembly of the wall system, the
displays must be positioned so that the lowest
row of displays sits above the bottom of the video
wall. Positioning the bottom of the displays lower
than the bottom of the video wall will severely
damage the displays when lowered to the ground.
9589-006-001-00 REV.1
