MVW55 / MVW554UNS
Page 10
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
Step 3
1)
Slide the MVW55 / MVW554UNS to the desired position against the tube.
2)
Insert two (2) M8 x 16mm set screws into the corner screw holes above
the tube (Figure 1).
3)
Tighten the screws against the MVW55 / MVW554UNS and the tube.
4)
Inside the MVW55 / MVW554UNS, wrap and secure rigging/flying
hardware (not included) around the tube (Figure 2).
WARNING!
Do not install the rigging/flying hardware or fly the
MVW55 / MVW554UNS(s) unless you are a qualified A/V installation
professional.
Front-View Close Up of MVW55 / MVW554UNS
M8 x 16mm Set Screw
Step 4
All flat-panel display
illustrations are shown for
example purposes only.
Universal spacers are needed to prevent
its display handle from hitting the
MVW55 / MVW554UNS.
Step 5
Attach the flat-panel display to either side of the MVW55 / MVW554UNS by
inserting the display’s quick-release buttons into the keyhole mounting slots on
the MVW55 / MVW554UNS, locking them into place.
Depending on your video wall configuration, install displays working from
the bottom frame up.
Figure 1
Figure 2
Rigging/Flying Hardware
Heavy-Duty Steel
Tube
Heavy-Duty Steel Tube (inside the
MVW55 / MVW554UNS)
•
When installing the display
,
attach four (4) universal spacers,
four (4) 6mm quick-release buttons and four (4) M6 x 20mm or
(4) M6 x 25 mm pan Phillips screws to the display’s back mounting
holes.
400X400 VESA PATTERN
•
When installing the display
,
attach four (4) universal spacers, four
(4) 8mm quick-release buttons and four (4) M8 x 20mm or (4) M8 x
25mm pan Phillips screws to the display’s back mounting holes.
Do not overtighten the screws.
600X400 VESA PATTERN
Keyhole Mounting
Slot
